No Drill Adhesive Wall Hook Rack, 5 Hooks, 31.5 cm, Black

A hook in a bathroom is not holding a coat. It is holding a wet towel, four hours a day, every day, in a room that gets a hot shower before work and another one at night.

What Are the Key Features of This Rustproof Adhesive Hook Rack?

• Rust is a laundry problem, not a hook problem - exposed metal inside a damp towel transfers an orange iron mark that a normal wash will not take out of white cotton.
• All three measurements are real - 31.5 cm wide, 18 cm tall, 6 cm out from the wall, taken from the product record and not from a carton, which is rare in this catalogue.
• Check the 6 cm depth before anything else - that is what a bathroom door has to clear if it opens back against the wall you are about to stick this to.
• Five rounded hooks across 31.5 cm - spaced far enough apart that two wet towels are not pressed together and drying into each other.
• Not for painted or textured walls - on paint an adhesive pad does not fail, it holds, and takes a patch of the paint with it when it eventually comes off.

Where Can You Use This No-Drill Hook Rack?

• On the tiled bathroom wall, taking a wet towel twice a day
• Behind the bathroom door - check the 6 cm depth against the door swing first
• On a kitchen wall, or in the bedroom
• Inside a fitted wardrobe door, where a drill would come through the other side
• In a rented flat, or on a tiled wall you are not allowed to cut into

Why Does Rust Matter More for Your Towels Than for the Hook?

• Stainless steel where the towel touches - the powder coat sits over it and the wood is kept back on the plate, away from anything wet.
• All three measurements are the product's own - so the 6 cm depth is real, and that is the figure a bathroom door has to clear.
• An adhesive pad that tells you where not to use it - on a painted wall the glue does not fail, it holds and takes the paint with it.

Details

Material & Build

• Powder-coated stainless steel rack on a wood backplate, recorded as rustproof.
• Five hooks with rounded ball ends - the rounding is there to protect fabric, and the spacing across the width keeps two wet towels from drying into each other.
• Mounting: high-bond adhesive pad, already applied, no drilling. Smooth non-porous surfaces only - tile, glass, metal or sealed wood. Not for rough, textured or painted walls.
• Fitting: clean and dry the surface, peel, position, press firmly for 30 to 60 seconds, then let the adhesive set before you hang anything on it.
• Colour: black. One 5-hook rack in the box.

Dimensions

• 31.5 cm wide - the span the five hooks are spread across.
• 6 cm deep - how far it stands out from the wall, and the first figure to check if it is going behind a door.
• 18 cm tall, and the rack itself weighs 100 g.
• The litre figure sitting in this product's record is an artefact of the letter L in the width measurement being read as litres. A hook rack has no volume, so it is discarded rather than printed.

Care

• Wipes clean.

Specifications